GENERAL EAST CO.,LTD
Your Partner For Modern Transportation Vehicles !!!
Add to Cart
4 axles Draw Bar Dump Tipper Trailer with steel box and hydraulic for sand and bulk material
A Draw bar trailer or full trailer is a term used for a freight trailer supported by front and rear axles and pulled by a drawbar. In Europe this is known as an A-frame drawbar trailer. A full trailer is a towed vehicle having at least two axles, and equipped with a towing device which can move vertically in relation to the trailer and controls the direction of the front axle(s), but which transmits no significant static load to the towing vehicle.
| 4 axles Draw Bar Dump Tipper Trailer with steel box and hydraulic for sand and bulk material | 6274ZZX-GB | ||
| overall outside dimension(mm) | Length | 9594 | |
| Width | 2520 | ||
| Height (unload) | 3664 | ||
| Draw Bar and Tripod Length | 2875 | ||
| Inner dimension of Dump box | Length | 7000 | |
| Width | 2300 | ||
| Height | 1700 | ||
| Material Thickness of the Dump Box | Floor Thickness | 5mm T700L | |
| Side Wall Thickness | 3mm T700L | ||
| Hydraulic Dump System | HYVA FCA157 with all the hydraulic kits including the oil tanker, Valve, connecting pipe, but not provide the PTO. | ||
| capacity(L) | 27000L | ||
| GVW(kg) | 40300 | ||
| vehicle total weight(kg) | 10300 | ||
| rated payload(kg) | 30000 | ||
| Wheel base(mm) | 5294+1320+1320 | ||
| Tread(mm) | Tread at front | 1820 | |
| Tread at rear | 1820/1820 | ||
| Front/Rear Overhang(mm) | /1976 | ||
| Approach/Departure angle(°) | /12 | ||
| Rated payload of Draw Bar Eyes (KN) | 250 | ||
| Axle | Front | BPW 12T*2 | |
| Rear | BPW 12T*2 | ||
| Tyres | 11R22.5*16 | ||
| Trailer Material | Carbon Steel | ||
| Suspension | Leaf Spring | ||
| Leaf Spring | /10/10/10 | ||
| Remark: | |||
| Optional Front Gantry and the right protection, ABS: WABCO; section size groove 150 × 75mm higher off the ground 500mm. With Wabco Brake. | |||
| Steel Structure: Material:High strength low alloy steel with 350 MPa yield strength is used for welded I-beam and 235 MPa in other fabricated parts. Main Beams: 500m deep x 146mm wide x 8mm web welded I-section main beams,Top Flange 14m thick, Bottom Flange 16m thick. Floor:3mm thick checkered steel plate. | |||
| OEM Parts Configuration: Turn Table: 25T grade made in China Tractor Hook: QYH001,Made in China. Auto-couple type Suspension:Mechanical suspension with 11 / 10/ 8/7 leaf spring (W100mm x T12mm per leaf). options: Bogie Suspension, Air Spring Suspension Axles: square axle with 12 tons capacity. Supplier & type: BPW/ FUWA/SAF/L1. Made in China.. Rims: 10 Holes ISO. Made in China. Option By the Factory.. Tires: 11R22.5 OPTIONS: 12R22.5, 315/80R22.5,385/65R22.5 , Triangle Brand , Made in China. Option By the Factory.. Brake System: Dual air brake system, Wabco relay emergency valve, OPTIONS: ABS. Option By the Factory. Brake Chamber: 30 type on front axle.30/30 type on other axles, Electrical System: Complete 24V installation with modular wiring harness. 7 pole plug placed at front in accordance to ISO, norms NO.1185. Side Lights: reflectors (orange); Rear Lights: direction indicators (orange) /brakes (red)/rear warning (white). | |||
| Others: Spare Tire Carrier: Equipped two sets per chassis without spare tire. Side Guard: Steel. Tool Box: Equipped one set. Painting: Color by customer’s requirement. Marking: By customer’s requirement. Options: Oil Tanker: 300L carbon steel. | |||
| Full 3D design and Force Analysis |
|
| Best Steel chassis |  |
| Brake Stability System
| |
| Lift-up Axle System
* | |
| Air Suspension
* | |
| Self-Steering Axles* | |